The Ultrafire UF-T20 with high performance CREE XML T6 LED brings some remarkable 400 lumens with it. You can program the brightness of the lamp with the key by push and holding it. The brightness will change to higher and then to lower. As soon as you release the button the brightness will be stored to the flash lights memory.
In addition to that the UF-T20 features a strobe function. The fast flickering light can, for example, irritate attackers or drag attention of saviors in an emergency.

Hårdanodiseret aluminium

The aluminum has a so-called hard anodized finish which produces a protective oxide layer on the aluminum surface. This protective layer is 5 to 25 micrometers thick protects the underlying metal from corrosion. Anodizing also significantly increases the hardness levels of the metal compared to conventuional finishing methods. The flashlight is well protected against corrosion and impacts and will serve you long and reliable.

What does lumen actually mean?

Lumens indicate the value of the luminous flux and this refers to the amount of the radiated quantity of light. Thus lumen is the most important term to describe the performance of a lamp.

CREE High Power LED (Cree Inc.)CREE High Power LED

Cree is one of the leading manufacturers of LED bulbs. Cree has gained world fame with his heat-resistant, high-performance LEDs. In this flashlight Cree bulbs were used. Long life and best lighting performance guaranteed.

The peculiarity of the UF-T20 is that this flashlight is compatible with many batteries. You can use normal AA Mignon batteries but also - and this is recommended - 16340, CR123 or 14500*. These batteries have a higher voltage of 3 or 3.7 volts. Therefore the torch is lit much brighter than with AA Mignon batteries which have only 1.5 volts.

To place smaller batteries than AA Mignon into the UF-T20 you have to remove the spacer located between the end and middle piece of the flashlight.

Batteries are not included in delivery. Please order separately.