Dieser Tongenerator mit Verstärkersonde identifiziert und verfolgt Drähte oder Kabel innerhalb einer Gruppe, ohne die Isolierung zu beschädigen. Dieses Werkzeug dient dazu, ein Netzwerk zu installieren und Gegenstände zu überprüfen. Der Tongenerator gibt ein einzelnes Signal oder mehrere Frequenzsignale aus und verfügt über zwei einzelne Testpatronen und ein 4-Pin-Testgelenk. Wenn Drähte in die Wand gebunden und verborgen sind oder in eine Sperrschicht eingebettet sind, während Sie den Tongenerator verwenden, kann das Tonsignal, das vom Hauptrahmen gesendet wird, sehr einfach mit der Sonde getestet werden. Der Durchgang eines Kabels, ein Fehler des Kabels, die Polarität des Stromkreises, ein Netzwerk oder die Arbeitsspannung des Modulkabels können mit diesem Gruppentester überprüft werden. Die Leitbahn des Stromkreises und die genaue Position können anhand der Kontrolllampe und des Tons des Lautsprechers beurteilt werden.
Features:
• The amplifier probe is designed to identify and trace wires or cables within a group without damaging the insulation
• Works with any tone generator to identify wires
• Volume control for increased sensitivity and adjustable to suit work environment
• Recessed On/Off button prevents battery drain
• It can be power with only one 9V battery and the device has a long battery life (approx. 100 hours of use)
• A plug receptacle is provided for use with a headset or headphone
• Red and black test leads are provided, and it has a standard conductor modular cord and plug
• A 3-position toggle switch controls the modes of operation plus a 3-colored LED is provided for the line polarity, continuity and voltage testing
• A tone selector switch, located inside the test set is provided for choosing either a single solid tone or dual alternating tone (CAUTION: Do´nt connect to an Active AC circuit exceeding 24V in this mode)









